Ride-on industrial floor sweepers for factory, warehouse and yard floors
An industrial floor sweeper pulls loose dirt, dust and debris off a hard floor with a main brush and two side brushes, and drops it straight into an onboard dustbin — dry cleaning, with no water and no wait for the floor to dry.
Designed as a heavy-duty warehouse sweeper, factory floor sweeper and outdoor parking lot sweeper, the machine pairs a central cylindrical main brush with dual swing-out side brooms and a vacuum dust-filtration fan. On the 1,330 mm ride-on build (complemented by compact walk-behind sweeper options for sub-1 m aisles), twin 390 mm side brushes feed a 700 mm main roller to clear a warehouse aisle in a single pass.
Dust suppression matters as much as the brush width: most builds carry a small water tank that damps the sweeping path so fine dust does not get thrown back into the air, alongside a filtration system that keeps the operator's cab clear. Facilities that also need wet cleaning on the same floor usually run a floor scrubber behind the sweeper — the sweeper clears loose debris first so the scrubber's brush disc is not just grinding grit into the surface.
Every unit ships as an export build: battery type, control layout and warning-light standard are set to your order before the machine is crated, and gradeability is rated up to 25% for sites with loading ramps.
Every sweeper spends time on our line with the main brush, both side brushes and the dust suppression system running together before it is crated. Brush height that drifts once the machine is warm is the fault worth catching here, because it shows up as a strip of missed floor rather than as an obvious breakdown.